AVK ABOVE-GROUND FIRE HYDRANT, PN10
Type B, ductile iron, automatic or manual drainage
Contact
AVK Valves India Pvt Ltd
117 & 118, 1st Floor, Road Number 3 Vijayanagar, EPIP Phase I, Whitefield, Bengaluru, Karnataka 560066, India
Above ground fire hydrant with Stortz-Hose-coupling - Type B for water and neutral liquids to max. 20° C
AVK above ground hydrants are 360 degree rotatable and height adjustable for easy installation. The hydrant is available with manual and automatic drainage. The automatic drainage hydrant is made in a flush proof design by means of a membrane drainage valve designed to close when the hydrant is under pressure, and open when the hydrant is shut off, allowing the water inside the barrel to be drained. In case of traffic knock down the PE pipe, connecting the upper barrel with the foot bend, will just bend and not break.
| Variant 09/30-001 | |
|---|---|
| Connection: | Flanged |
| Material: | Ductile iron |
| PN: | PN 10 |
Features
- Outlet – 1 x 3” B Storz hose nozzles
- Automatic drainage in flush proof design or with manual drainage
- The 360 degree revolving outlet offers optimum flexibility during installation
- Height adjustable by means of a telescopic PE pipe in the lower part of the hydrant
- Adjustable flange facilitates adaption to the ground
- Protection against unauthorized use by use of a standardized operating key
- Protection against leakage, in case of traffic knock down, as the PE-pipe between upper barrel and foot bend will bend, and not break
- Telescopic stem rod of hot dip galvanized steel
- Red fusion bonded epoxy coating in compliance with DIN 3476 part 1 and EN 14901 and with a topcoat of UV resistant polyester on upper barrel
- Blue fusion bonded epoxy coating in compliance with DIN 3476 part 1 and EN 14901 on foot bend and combi-flange
Downloads
Components
| 1. | Key operating nut | Cast iron, zinc coated |
| 2. | Storz coupling | Aluminium |
| 3. | Cover | Ductile iron GJS-600-3 |
| 4. | Fastening nut | Cast iron, zinc coated |
| 5. | Upper barrel | Ductile iron GJS-400-15 |
| 6. | Pipe | PE 100 |
| 7. | Flange adaptor | Ductile iron GJS-500-7 (GGG-50) |
| 8. | Flange adaptor | Ductile iron GJS-500-7 (GGG-50) |
| 9. | Isiflo coupling | Brass |
| 10. | Plug | Stainless steel 1.4305 |
| 11. | Valve seat | SBR rubber |
| 12. | Drain pipe | PE |
| 13. | Foot bend | Ductile iron GJS-400-15 |
| 14. | Drain plug | Ductile iron, zinc plated |
| 15. | Adjustable ground cover | Ductile iron GJS-600-3 |
| 16. | Adaptor | Stainless steel, cast |
Test/Approvals
- Hydraulic test according to EN 1074-1 and -2 / EN 12266
- Approved for drinking water
Standards
- Flange drilling to EN1092, PN10/16