AVK GATE VALVE, FLANGED, BS STD., PN10/16
DI body, EN1092 flange, EPDM rubber, act. flange, A2 bolts, CW724R nut, 250µm blue EP (WRAS) coating

Contact
AVK Valves India Pvt Ltd
117 & 118, 1st Floor, Road Number 3 Vijayanagar, EPIP Phase I, Whitefield, Bengaluru, Karnataka 560066, India
Resilient seated gate valve for water and other neutral liquids, including treated waste water free of solids and fibrous impurities to max. 70°C
AVK series 21 gate valves are designed to BS 5163 and come with built-in safety in every detail. The wedge is fully vulcanized with AVK’s own drinking water approved EPDM rubber compound. It features an outstanding durability due to the ability of the rubber to regain its original shape, the double bonding vulcanization process and the sturdy wedge design. The triple safety stem sealing system, the high strength stem and the thorough corrosion protection safeguard the unmatched reliability.
Variant 21/38-006 | |
---|---|
Connection: | Flanged |
Material: | Ductile iron |
DN: | DN50 - DN400 |
PN: | PN 16 |
Closing direction: | Clockwise to Close |
Features
- Wedge nut is made of high strength Si-brass, designed as a fixed, integral part of the wedge which prevents vibration and ensures durability
- Full circle thrust collar keeps the stem firmly lined up and ensures low operating torque
- Wedge core fully vulcanized with drinking water approved EPDM rubber in a process that eliminates creeping corrosion underneath the rubber
- A large conical stem hole going all the way through the wedge ensures circulation and prevents stagnant water
- Triple safety stem seal with an NBR wiper ring outermost to protect against contamination from outside, in the middle two O-rings around the replaceable radial bearing, and innermost an O-ring is the main seal to the system pressure
- Wedge shoes in PA and guide rails on the body make the wedge slide easily up and down regardless of differential pressure
- Stem in stainless steel with wedge stop and rolled threads for high strength
- Bonnet gasket in EPDM with a circular cross-section, fixed in a recess to avoid blow-out
- Counterbored stainless steel, A2 bonnet bolts, sealed with hot-melt and encircled by the bonnet gasket
- 250µm blue epoxy (WRAS) coating
Downloads
Reference nos. and dimensions:
AVK ref. no. | DN mm |
Flange drilling |
L mm |
W mm |
H mm |
H3 mm |
Actuator flange |
F1 mm |
Theoretical weight/kg |
---|---|---|---|---|---|---|---|---|---|
21-050-38-01420CC | 50 | PN10/16 | 178 | 165 | 47 | 366 | F10 | 23 | 15 |
21-065-38-01420CC | 65 | PN10/16 | 190 | 185 | 47 | 376 | F10 | 23 | 16 |
21-080-38-01420CC | 80 | PN10/16 | 203 | 200 | 47 | 391 | F10 | 23 | 17 |
21-100-38-01420CC | 100 | PN10/16 | 229 | 220 | 48 | 422 | F10 | 23 | 20 |
21-150-38-01420CC | 150 | PN10/16 | 267 | 285 | 49 | 542 | F10 | 23 | 35 |
21-200-38-00420CC | 200 | PN10 | 292 | 340 | 47 | 656 | F10/F14 | 23 | 54 |
21-200-38-01420CC | 200 | PN16 | 292 | 340 | 47 | 656 | F10/F14 | 23 | 54 |
21-250-38-00420CC | 250 | PN10 | 330 | 400 | 69 | 799 | F10/F14 | 30 | 85 |
21-250-38-01420CC | 250 | PN16 | 330 | 400 | 69 | 799 | F10/F14 | 30 | 85 |
21-300-38-00420CC | 300 | PN10 | 356 | 455 | 69 | 910 | F10/F14 | 30 | 118 |
21-300-38-01420CC | 300 | PN16 | 356 | 455 | 69 | 910 | F10/F14 | 30 | 118 |
21-350-38-00420CC | 350 | PN10 | 381 | 505 | 66 | 1081 | F10/F14 | 30 | 180 |
21-350-38-01420CC | 350 | PN16 | 381 | 533 | 66 | 1095 | F10/F14 | 30 | 213 |
21-400-38-00420CC | 400 | PN10 | 406 | 565 | 66 | 1138 | F10/F14 | 30 | 190 |
21-400-38-01420CC | 400 | PN16 | 406 | 580 | 66 | 1145 | F10/F14 | 30 | 220 |
Components
1. | Wiper ring | NBR rubber |
2. | O-ring | NBR rubber |
3. | Radial bearing | Polyamide |
4. | Actuator flange | Ductile iron GJS-500-7 |
5. | Bolt | Stainless steel A2 |
6. | Stem | Stainless steel 1.4021 |
7. | O-ring | EPDM rubber |
8. | Thrust collar | Brass CW724R Si-alloy |
9. | O-ring | EPDM rubber |
10. | Bonnet | Ductile iron GJS-500-7 |
11. | Bonnet gasket | EPDM rubber |
12. | Body | Ductile iron GJS-500-7 |
13. | Wedge nut | Brass CW724R Si-alloy |
14. | Wedge shoe | Polyamide |
15. | Wedge rubber | EPDM rubber |
16. | Wedge core | Ductile iron GJS-500-7 |
17. | Key | Stainless steel |
18. | Bonnet bolt | Stainless steel A2 |
Test/Approvals
- Seat: 1.1×PN (in bar), Body: 1.5×PN (in bar).
- WRAS approved materials
Standards
- EN 1074 part 1 & 2
- Face-to-face dimension according to EN 558, Series 3
- Flange drilling to EN1092, PN10/16
